7
VACUUMING FLOORS AND CARPETS
You should regularly check that the nozzle cushions and the brush roller are clean in order to avoid scratching
sensitive floors. Start the device by pushing the on/off button away from you.
USING THE HAND VACUUM
To release the hand vacuum from the body, press the hand vacuum release button on metal tube and the
hand vacuum will become detached. Carefully remove from the body and hold by the handle, the crevice
nozzle, upholstery nozzle could be fitted to the nozzle of the hand vacuum when vacuuming hard to reach
place.
EMPTYING/CLEANING
Regularly clean the dust container and filters to maintain maximum performance.
Careful cleaning of the dust container and filters.
1. Remove the whole dust container by pressing the release button and turning the dust container off.
2. Pulling out the filters and emptying the contents of the dust container into a suitable vessel or bag. (The
filter can be shaken clean or cleaned and rinsed using warm water. Make sure that the parts are dry before
they are re-installed).
3. Re-install the components
Firstly re-install the filter after the filter baffle plate in the dust container. Place to match up with the both
ventilation positions. Secondly assembling the dust container following up the opposite procedures when
detaching the dust container.
Summary of Contents for Stellar Vstellar
Page 5: ...5 PARTS DIAGRAM...
