EN
22
10. Put the lid on the dust container so that the arrow symbol on the dust container
points to the
symbol on the lid. Close the lid by turning it as far as it will go. The
arrow sym- bol should now be pointing to the symbol.
11. Put the dust container in the device. Make sure that it audibly locks into place.
Cleaning the HEPA exhaust air
fi
lter
The HEPA exhaust air
fi
lter is situated behind the protective grill on the back of the
vacuum cleaner.
1. Pull down the exhaust hatch latch with
fi
lter (
D
) and
remove the hatch simultaneously.
2. Tap it out over a garbage bin. If necessary, clean it with
a soft brush. You can also rinse the
fi
lter out under clear,
lukewarm warm water.
Attention: Do not use any cleaning products!
Next, shake off any surplus water and leave the
fi
lter to air
dry completely before replacing it in the device.
3. Brush or wipe the
fi
lter compartment if required.
4. Place the exhaust hatch with
fi
lter in the device and close the hatch. The hatch must
audibly lock into place.
Cleaning the housing and nozzles
• If needed, clean the housing with a damp, soft cloth.
• Regularly remove hair and lint from the nozzles.
Storage
• For storage you hook the
fl
oor nozzle into the holder on
the back of the device (see
fi
gure) and close down the
telescopic tube as far as it will go.
• Store the vacuum cleaner in a cool dry indoor room where
it cannot be reached by children or animals.
Troubleshooting
If the device should stop working properly,
fi
rst check whether you are able to correct
the problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause/solution
The vacuum clea-
ner has no suction
power.
• Is the mains plug not correctly connected with a socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
D
09897_DE-EN-FR-NL_A5_V1.indb 22
09897_DE-EN-FR-NL_A5_V1.indb 22
19.01.2016 11:16:55
19.01.2016 11:16:55
