EN
16
Avoiding damage to materials, property and the device
■
Always place the device on a dry, level,
fi
rm and heat resistant surface.
■
Lay the cable of the mains adapter so that it does not pose a tripping hazard.
■
Make sure that the mains cord does not get pinched, kinked or laid over sharp edges
and does not come into contact with hot surfaces.
■
Maintain adequate distance to heat sources such as stoves or ovens to prevent da-
mage to the device. Do not place any open
fl
ames, e.g. burning candles, in the direct
vicinity of the device, cord, rechargeable battery and mains adapter.
■
Do not allow the device to fall and do not subject it to strong percussions.
■
Do not pull or carry the device by the cord of the mains adapter.
■
Do not subject the device to extreme temperatures, severe changes in temperature,
moisture, wetness or direct sunlight.
■
Do not use any corrosive or abrasive cleaning agents to clean the device. They
could damage the surface.
■
Only use the device if it has been completely and correctly assembled! The dust bin
and
fi
lter must be in place. The
fi
lters may not be damaged!
■
Do not insert anything in the openings / nozzles of the device and make sure that
they are not plugged.
■
Empty the dust bin after every use. The
fi
lters must also be cleaned regularly to
prevent the motor from being overloaded.
■
Only use the accessories recommended by the manufacturer.
09847_DE-EN-FR-NL_A5_V1.indb 16
09847_DE-EN-FR-NL_A5_V1.indb 16
06.01.2016 08:14:48
06.01.2016 08:14:48
