EN
22
Troubleshooting
If the device does not work properly, check if you can fi x the problem yourself fi rst. If
these steps do not solve the problem, contact customer service.
Do not try to repair an electrical device yourself!
Problem
Possible cause
Solution
The device doesn't start. The battery is drained.
Charge the battery.
The suction power is too
weak.
The battery is weak.
Charge the battery.
The dust collector (
9
) is too
full.
Empty the dust collector.
The fi lters (
10, 11
) are dirty.
Clean the fi lters.
The suction opening (
12
) is
clogged.
Switch the device off and
remove the clog.
Parts that are too big or too
heavy can snag on the carpet.
Remove these objects by
hand.
Dust escapes from the
device when vacuuming.
Dust collector (
9
) or fi lters (
10,
11
) not fi tted correctly.
Correct the position of the
dust collector and fi lters.
Make sure that the dust
collector is closed.
The fi lters (
10, 11
) are dirty.
Clean the fi lters.
The fi lters (
10, 11
) are worn
out or damaged.
Replace the fi lters.
The operating light does
not illuminate when the
device is connected to
the mains.
The power adapter (
C
) does
not plug into the wall outlet
correctly or the coaxial power
connector does not plug
correctly into the connection
socket (
6
) on the device.
Correct the fi t.
The socket is defective.
Try another socket.
There is no mains voltage.
Check the fuse of the
mains connection.
Strange odour
The device is used for the fi rst
time.
A new odour is normal
when the device is used
for the fi rst time, and will
go away over time.
Summary of Contents for 04172
Page 48: ...NL 48 ...