19
EN
Problem
Possible cause / solution / tips
The UV-C
lamp (
11
) does
not light up.
• The automatic switch-off function of the UV-C lamp has been
activated. Check the safety switches (see the “Safety Devices”
chapter).
• The automatic switch-off function has not been activated. The
UV-C lamp or the device is defective. Contact our customer
service department.
During vacuum
cleaning, an un-
pleasant smell
is detected.
• Is the device being used for the
fi
rst time? A smell often
develops when new devices are
fi
rst used. The smell should
disappear once the device has been used several times.
• Has the device already been used frequently? The device is
defective. Switch off the device, pull the mains plug out of the
plug socket and contact the customer service department.
Technical Data
Model number:
SV1801A
Article number:
03406
Voltage supply:
220 – 240 V ~ 50 / 60 Hz
Power:
300
W
Protection class:
II
ID operating instructions: Z 03406 M DS V1 0419
Disposal
PLEASE NOTE!
■
The UV-C lamp should be removed prior to disposal of the device and disposed of
separately from the device. Notes on how to remove the UV-C lamp can be found in
the “Cleaning and Storage” chapter – “Cleaning the UV-C Lamp”.
Dispose of the packaging material in an environmentally friendly manner so that
it can be recycled.
This device is governed by the European Directive 2012/19/EU on waste electri-
cal and electronic equipment (WEEE). Do not dispose of this device as normal
domestic waste, but rather in an environmentally friendly manner via an of
fi
cially
approved waste disposal company.
Customer Service
/
Importer:
DS Produkte GmbH
Am Heisterbusch 1, 19258 Gallin, Deutschland
Tel.: +49 38851 314650
(Calls to German landlines are subject to your provider’s charges.)
All rights reserved.
