21
EN
• Removing: Press the release button (
2
) on the side of the
handle (
3
) and pull out the cordless vacuum cleaner.
Charging station
• Assembling: Plug together the two parts of the charging
station (
23
) (see picture).
• Taking apart: Press the release button (
20
) at the bottom
on the back and pull both parts of the charging station (
23
)
apart at the same time.
• On the back of the charging station (
23
) there are holders
for storing the crevice and brush nozzle (
19
). Place the
crevice nozzle (
18
) in the top holder and the brush noz-
zle (
19
) in the bottom holder.
To pull out the brush nozzle (19), grip and pull the
bristles at the top end.
• Hook the frame (
6
) into the charging station (
23
).
Charging Up the Battery
PLEASE NOTE!
■
Switch off the device before you charge it.
•
It is essential that you charge up the battery fully before you
fi
rst use
the device in order to achieve the maximum charging capacity.
• If the battery is fully discharged during use, it must be fully charged up again
before it is next used.
1. Place the assembled charging station (
23
) in a dry location near to a properly in-
stalled, easily accessible plug socket.
2. First plug the barrel connector on the mains cable into the socket (
22
) of the charging
station (
23
) and then connect the mains adapter (
21
) to the plug socket.
3. Hook the frame (
6
) into the charging station (
23
). The battery control lamps (
9
) will
fl
ash during the charging process.
4. If all three battery control lamps (
9
) light up constantly, the battery is fully charged up.
