3
INSPECTION:
Carefully unpack and inspect your MAXX-400 for shipping damage. Each machine is tested and inspected before
shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately
if you notice damage to the box or to the machine or parts.
CLEANING SOLUTIONS:
We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very thoroughly they
could cause a build-up in the pump, lines, heat exchanger and/or quick disconnects. Any problem caused by a
chemical build-up is not covered by warranty. Use a neutral cleaner with a pH between 5 and 10 to avoid premature
wear of the pump, seals, and/or other components.
MAINTENANCE:
For optimum performance flush the machine with clear water at the end of each working day. Once a month,
minimum, run a flushing compound through the machine to break up any mineral or chemical build-up that may
have formed. The vacuum motor and the pump do not require any scheduled maintenance; however, the motor
may require replacement brushes after 1000 - 1500 hours. Clean the body with an all-purpose detergent, and
protect it with an automobile interior polish. Lubricate the wheels, castors, and quick disconnects with an all
purpose silicone spray.
PARTS AND SERVICE:
Repairs, when required, should be performed by your authorized distributor who maintains an inventory of
original replacement parts and accessories. Call the distributor from whom you purchased this machine if you
need parts and service. Be sure to specify the machine model. Have your serial number handy.
Contact Info:
CleanMaster Corporation
11015 47th Ave. West
Mukilteo, WA 98275
Toll free: 1-800-426-8972
Phone: 425-775-7272
Fax: 425-771-7156
Serial Number: __________________
Model: MAXX-400
Purchase Date:_____________
Write the name and phone number of your
distributor:
_____________________________________
_____________________________________
