Cleanfix RA705 IBC, Operating Instruction

Page: 30 / 64

30 | 30 | 30 |
FOR SAFETY:
Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
1. Raise scrub head off floor. Attach the pad to the
pad driver before installing the driver. Secure pad
with center-lock.
FOR SAFETY:
Do not operate machine with pads
or accessories not supplied or approved by Cleanfix.
The use of other pads may impair safety.
2. Align the brush under the holder and press it up-
wards to engage it.
3. To remove the pad drivers/brushes, raise the scrub
head and press down on the button . Pad will drop
to floor.
The machine is equipped with two solution tank
fill-port locations. A front bucket fill-port and a
rear hose fill-port.
WARNING:
Flammable materials can cause an
explosion or fire. Do not use flammable materials in
tank(s).
ATTENTION:
For Conventional Scrubbing, only use
commercially approved cleaning detergents. Machine
damage due to improper detergent usage will void the
manufacturer’s warranty.
INSTALLING DISK BRUSHES/PADS
FILLING SOLUTION TANK
CONTROL PANEL OPERATION
1. Display screen
2. Set
3. Regulation of the brush pressure
4. Energy-saving mode
5. Water quantity regulation
6. ON / OFF button
7. Speed regulating switch (driving)
8. Forward / backward switch (driving)
English
5
6
8
1
7
2
3
4