Cleaner Wash 5411074168001, Original Instructions Manual

Page: 28 / 44

8
ASSEMBLY INSTRUCTION
You will need a standard screw driver.
Insert power card hold into the machine, as the fig.
Align holes on the bottom of the pressure cleaner as shown and
tighten the 4 screws, as the fig.
Fit the wheel to the machine, as the fig
Connection
1. Attach the high pressure hose to the pressure water outlet of
the machine.
2. Attach the spray handle to the high pressure hose. Prior to
operating the machine please ensure that the high pressure hose
has been completely uncoiled. Whilst the machine is in operation
the hose MUST not loop.
3. Mount the nozzle or any other equipment you want to use.
4. Connect the machine to the water and power supplies.
INSTALLATION, ELECTRICAL
AND WATER CONNECTIONS
1. pressure cleaner
2. water supply hose
3. water connection
4. water inlet
5. high pressure tube
6. water outlet(backside)
7. spray gun
8. power supply
* No. 2, 3, 8 are not included