4
WSAR-Series | Version 1.01
Intended Use
2.2 General safety notes
Stürmer Maschinen GmbH accepts no liability for design
and technical modifications to the device.
Claims of any kind for damage due to improper use are ex-
cluded.
3
Intended Use
The device is used exclusively to unwind and rewind the
water hose. Intended use also includes compliance with
all information in these instructions. Any use beyond the
intended use or other use is considered misuse.
3.1 Misuse
3.2 Residual risks
When the water hose reel is used as intended, no resi-
dual risks are identified.
4
Type plate
Fig. 1: Type plate WSAR 20
5
Technical Data
6
Assembly
Step 1: Choose a suitable position on the wall. Mark and
drill 4 holes to correspond with the holes in the
wall bracket (Fig. 2).
NOTE:
The bracket can be installed on other se-
cure structures, but the supplied hardware is for
wall mounting only.
Fig. 2: Wall mounting
Step 2: Attach the bracket to the wall using the supplied
screws (Fig. 3A).
Fig. 3: Fastening the bracket and hose reel
Step 3: Align the holes on the hose reel body with the
vertical holes on the bracket. Insert the swivel
rod into the holes in the bracket and reel
housing (Fig. 3B).
ATTENTION!
Do not operate water hose reel in hazardous areas!
WARNING!
Danger in case of misuse!
Misuse of the device can lead to dangerous situati-
ons.
- Only operate the device in the power range speci-
fied in the technical data.
- Never bypass or disable the safety devices.
- Only operate the unit in a technically perfect condi-
tion.
WSAR 20
WSAR 30
Hose length
20+2 m
30+2 m
Hose diameter
11x15 mm
11x15 mm
Mounting
height
1,2 - 1,5 m
1,2 - 1,5 m
Weight approx.
7 kg
9 kg
Dimensions
(LxWxH)
450x200x340
mm
480x230x380
mm
A
B
