CleanCraft ADSG 15 Operating Instructions Manual Download Page 11

Technical Data

ADSG 15 | Version 1.03

11

4

Technical Data

4.1 Table

4.2 Type plate 

Fig. 14: Type plate 

5

Transport, Packaging, Sto-
rage

5.1 Delivery and transport

Delivery

Check the battery-operated pressure sprayer for visible 
transport damage after delivery. If you discover any da-
mage to the battery-operated pressure sprayer, please 
report this immediately to the transport company or the 
retailer.

Transport

 

Improper transport of single devices, packed or unpac-
ked non-secured devices that are stacked on top of each 
other or next to each other is liable to accidents and can 
cause damage or malfunctions for which we do not pro-
vide liability or guarantee.

Transport the scope of delivery secured against shifting 
or tilting to the place of installation with a sufficiently di-
mensioned industrial truck. 

Transport may only be carried out by authorized and 
qualified persons.

5.2 Packaging

All packaging materials and packaging aids used for the 
Battery-operated pressure sprayer are recyclable and 
must always be returned for material recycling.

Shredded packaging components should be disposed of 
in the waste paper container.

The foils are made of polyethylene (PE) and the padded 
parts of polystyrene (PS). These materials can be han-
ded in at a recycling collection depot or to your local wa-
ste disposal company.

5.3 Storage

Store the battery-operated pressure sprayer in a dry, 
clean and frost-free environment.

Data

ADSG 15

Length (product) ca.

344 mm

Width/Depth (product) ca. 

241 mm

Height (product) ca.

486 mm

Weight (net) ca. 

4,3 kg

Supply voltage

18 V

Current type

DC

Working pressure 

1,2 - 4,5 bar

Working pressure (max)

4,5 bar

Pump pressure 

3,2 - 4,6 bar

Pump pressure (max)

6,5 bar

Delivery rate (max) 

126 l/min

Working capacity 

48 - 90 l/min

Inlet temperature 

40 °C

Sound pressure level

63,4 dB(A)

Sound power level

75 dB(A)

Engine speed 

2100 rpm

Protection class

Charger II / Device III

Engine insulation class

A

Total current consumption 

0,8 A

Tank 15 

Liter

High-pressure hose length 

1,7 m

Battery capacity 

2 Ah

Operating time 

2 - 3 h

Charging time 

ca. 5 h

ATTENTION!

Danger of injury due to objects falling over or off the 
forklift, pallet truck or transport vehicle. 
Only use transportation equipment and load slings 
that can carry the total weight. 

Summary of Contents for ADSG 15























Reviews: