Introduction
dryCAT - Series | Version 2.04
3
1
Introduction
With the purchase of the dry vacuum cleaner from
CLEANCRAFT you have made a good choice.
Read the operating instructions carefully before
commissioning.
It gives you information about the proper commissioning,
intended use and safe and efficient operation and main-
tenance of your dry vacuum cleaner.
The operating manual is part of the vacuum cleaner pac-
kage. Always keep this operating manual in the location
where your vacuum cleaner is being operated. All local
accidant prevention regulations and general safety in-
structions for the operating range of your dry vaccum cle-
aner must also be complied with.
The illustrations in these operating instructions are for
basic understanding only and may differ from the actual
version.
1.1 Copyright
The contents of these instructions are copyright. The
may be used in conjunction with the operation of the vac-
cum cleaner. Any application beyond those described is
not permitted without the written approval of Stürmer
GmbH. For the protection of our products, we shall regi-
ster trademark, patent and design rights, as this is pos-
sible in individual cases. We strongly oppose any infrin-
gement of our intellectual property.
1.2 Costumer service
Please contact your dealer if you have questions concer-
ning your dry vaccum cleaner or if you need technical
advice. They will help you with specialist information and
expert advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair-Service:
Fax: 0951
96555-111
E-Mail: [email protected]
Internet: www.cleancraft.de
Ordering spar parts:
Fax: 0951
96555-119
email: [email protected]
We are always interested in valuable experience and kn-
woledge gained from using the application-which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised while talking applicable standards and
rules, the state-of-the-art technology and our long-term
knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use,
- Use of untrained staff,
- Unauthorised modifications,
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
The obligations agreed in the delivery contract, the gene-
ral terms and conditions as well as the delivery conditi-
ons of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2
Safety
This section provides on overview of all important safety
packages for the protection of operating personnel as
well as for safe and fault-free operation. Other task ba-
sed safety notes are included in the paragraphs of the in-
dividual phases of life.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indica-
tes an imminently dangerous situation which may
lead to death or serve injury if not avoided.
WARNING!
This combination of symbol and signal words indica-
tes a potentially dangerous situation which may lead
to death or serve injury if not avoided.
Summary of Contents for 7002155
Page 20: ...www cleancraft de ...
