Clean CRD162, Operation Manual, Page: 4 / 10

4
3.0 Operation
3.1 Cutting up to 24”

For cutting lengths from 3/4” to 24”, locate the “
BLACK”
slide block to the desired cut
length using the scale. Secure the slide block into position by rotating the thumb-screw
clockwise; take care not to over tighten.
Figure 3.1.1
Figure 3.1.1

Open the cutter handle with you left hand, with your right hand pull the tubing through
the cutter cradle to the slide block. Pull down the cutter handle with your left hand.

Remove the cut tubing.