Button at top left with “few bubbles” symbol
(3:20 minutes)
:
Everyday use with good quality tap water.
Middle button with “many bubbles” symbol (7:30 minutes):
By using this program the water will become more highly energized. For low quality,
bad tasting or heavily chlorinated water, run the program twice. Wait for the vortex to
end and settle, before pressing the button the second time.
Top right button with “tuning fork” symbol (3:20 minutes):
Programmed to get you started using the Vortexér.
THE FUNCTION BUTTONS ON THE LID
HOW TO START - STEP BY STEP
Week 1:
Use the “tuning fork” button. Start with 1⁄2-1 glass of water on the first day. If you do not
feel any discomfort, drink 1-2 glasses for the rest of the week.
Week 2 and 3:
Keep using the “tuning fork” button. Drink up to about 1 liter per 40 kilo body weight. If
needed you can prolong this period before you go to the next step.
After 3 weeks:
If you do not feel any discomfort, you are ready to use the “few
bubbles” button. If you feel any discomfort – drink less.
When the body gets used to the altered energy and quality of the vortexed water,
you may want to use the “many bubbles” button to increase the energy in the water.
Only push once. If this seems too strong, go back to the previous setting.
Only run the “many bubbles” setting twice if you have very low quality water.
IMPORTANT!
ALWAYS REMOVE THE LID WHEN
:
1. FILLING IT WITH WATER.
2. PUTTING THE JUG IN A REFRIGERATOR.
Image 2a
Image 2b
Image 3a
Image 3b
To stop the vortex earlier/manually press it once.
