5900S Neutralizer Operation & Maintenance Manual
Page 12
www.cleanwaterstore.com
Rev 110117
Program Your Valve
Main Menu
1. Remove cover by pulling out front and back tabs
slightly and lifting straight up to access control
panel.
2. Enter main menu, by pressing the
Menu/Enter
button once (Time of day will flash)
3. Set current time of day by pressing the
Set/Change
button (First digit will begin to flash)
4. To change digit value, press the
Set/Change
button.
5. To accept the digit, press the
Menu/Enter button
6. Once the last digit for current time of day is accepted all digits will flash.
7. With all digits flashing next press the Menu Button to set A.M. or P.M.
8. Once A.M./P.M. is accepted the next menu item will flash
9. To Set Number of Days Between Backwash Cycles (A) Press the Set/Change Button and
set number of days between cycles. Maximum value is 29. If value is set to 0, no
automatic backwash will occur.
10. The recommended initial setting for the Neutralizer Filter is every 4 days for families or
heavy use and up to every 7 days for 1 to 2 persons in the home. If you experience
pressure loss in between backwashes, increase frequency of backwash up to once per
day.
11.
To exit menu, press the Menu/Enter button
