background image

 

 

7.0    Warranty 

         

          7.1     Warranty 
 

The manufacturer warrants the product manufactured by it, when properly installed, operated, applied and maintained in 
accordance with the procedures and recommendations outlined in the manufacturer’s operation manual, to be free from 
defects in material or workmanship for a period as specified below, provided such defect is discovered and brought to the 
manufacturer’s attention within the aforesaid warranty period. 
 
The manufacturer will repair or replace any product or part determined to be defective by the manufacturer within the 
warranty period, provided such defect occurred in the normal service and not as a result of misuse, abuse, neglect or accident. 
Normal maintenance items requiring routine replacement are not warranted. The warranty covers parts and labor for the 
warranty period unless otherwise specified. Repair or replacement shall be made at the factory or the installation site, at the 
sole discretion of the manufacturer. Any service performed on the product by anyone other than the manufacturer must first 
be authorized by the manufacturer. 
 
Unauthorized service voids the warranty and any resulting charge or subsequent claim will not be paid. Products repaired or 
replaced under warranty shall be warranted for the unexpired portion of the warranty applying to the original product. 
 
The foregoing is the exclusive remedy of any buyer of the manufacturer’s product. The maximum damages liability for the 
manufacturer is the original purchase price of the product or part. 
 
THE FORGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER 
WRITTEN, ORAL, OR STATUTORY, AND IS EXPRESSLY IN LIEU OF THE IMPLIED WARRANTY OF 
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE 
MANUFACTURER SHALL NOT BE LIABLE FOR LOSS OR DAMAGE BY REASON OF STRICT LIABILITY IN 
TORT OR ITS NEGLIGENCE IN WHATEVER MANNER INCLUDING DESIGN, MANUFACTURE OR INSPECTION 
OR THE EQUIPMENT OR ITS FAILURE TO DISCOVER, REPORT, REPAIR, OR MODIFY LATENT DEFECTS 
INHERENT THEREIN. 
 
THE MANUFACTURER, HIS REPRESENTATIVE OR DISTRIBUTOR SHALL NOT BE LIABLE FOR LOSS OF USE 
OF THE PRODUCT OR OTHER INCIDENTAL OR CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES 
INCURRED BY THE BUYER, WHETHER ARISING FROM BREACH OF WARRANTY, NEGLIGENCE OR STRICT 
LIABILITY IN TORT. 
 
The manufacturer does not warrant any product, part, material, component, or accessory manufactured by others and sold or 
supplied in connection with the sale or manufacturer’s products. 

 

        7.2 Warranty Period 

 

Parts and labor are for ninety (90) days from the date of shipment from the factory. Freight to the factory on units that the 
manufacturer requests to be returned shall be paid by the purchaser, all return freight to be paid by the manufacturer; means 
of transportation to be specified by the manufacturer. 
 

For additional information contact:  

www.cleanroomdevices.com 

                                                                                            

 

 

   Clean Room Devices, Inc. 

                                                                                                                                          10855 Dover Street, Suite 100 

                                                                                                                                Westminster, CO 80021 

                                                                                                                 303-438-0853 

 

 

 

Summary of Contents for CRD 410









Reviews: