BLX-200W Manual Page 7 of 9
Updated: 02/11/21
USER MANUAL: BLX-200W
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Gener
al
Ins
talla
tion
Oper
ation
Appendix
General Use
Prior to use - ensure brushes, handrail, and foot plates
are secured and the system itself properly installed.
To verify water/sanitizer supply; step on the Foot
Plate to initiate water/sanitizer flow. Before operating
the unit, ensure solid footing and
use both hands on
the handrail for support.
1.
To begin operation, step up to the unit and grip
the support handrails.
2. Enter the unit from either end, placing one boot in
the brush section and the other on the opposing
foot plate to activate the spray system.
3.
Push the boot back and forth multiple times so
every part makes contact with the brushes.
4.
Once the first boot is clean, remove it and walk
through to the second scrubber and repeat the
process with the other boot.
5.
If boots are extremely dirty, it may be necessary to
scrub them multiple times.
Cleaning and Wash-Down
1.
Shut off water supply to unit and depressurize
water lines.
2. Remove the Foot Plates and brushes from the
unit.
3. Brushes and Foot Plates can be washed,
individually, in a COP tank, or wash machine.
4.
The frame can be washed down by conventional
means.
Operation
The following maintenance procedures are
recommended for normal use. Units which see a
high amount of daily use should be inspected more
frequently as necessary.
Weekly:
•
Inspect brushes for damage or wear.
• Check for missing or deformed bristles.
•
Inspect plumbing/water lines for damage
•
Ensure solid mounting to floor.
Monthly:
•
Check all fasteners to ensure they are tight.
• Ensure warning labels and decals are present
and in good condition.
•
Inspect valve for damage
Quarterly:
•
Inspect structure for cracked welds or bent
components.
Maintenance
