BLX-100D Manual Page 5 of 7
Updated: 02/11/21
USER MANUAL: BLX-100D
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Gener
al
Ins
talla
tion
Oper
ation
Appendix
General Use
Prior to use - ensure brushes and debris tray are
secured and the system itself properly installed.
Before operating the unit, ensure solid footing and
use both hands on the handrail for support.
1.
To begin operation, step up to the unit and grip
the support handrail.
2. Place one boot in the unit.
3.
Push the boot back and forth multiple times so
every part makes contact with the brushes.
4.
Once the first boot is clean, remove it and repeat
the process with the second boot.
5. If boots are extremely dirty, it may be necessary to
scrub them multiple times.
Cleaning and Wash-Down
1. Remove the Debris Tray and brushes from the
unit.
2. Brushes and Debris Tray can be washed,
individually, in a COP tank or wash machine
3.
The frame can be washed down by conventional
means.
Operation
The following maintenance procedures are
recommended for normal use. Units which see a
high amount of daily use should be inspected more
frequently as necessary.
Weekly:
• Inspect brushes for damage or wear.
•
Check for missing or deformed bristles.
•
Ensure solid mounting to floor.
Monthly:
•
Check all fasteners to ensure they are tight.
• Ensure warning labels and decals are present
and in good condition.
Quarterly:
•
Inspect structure for cracked welds or bent
components.
Maintenance