Cordless Electrostatic Sprayer By Clean Gate: You’ll be able to
sanitize more efficiently and effectively in less time and use less
sanitizing, disinfecting, or cleaning chemicals using the Clean Gate
Cordless Electrostatic Sprayer. Significantly more effective than tra-
ditional spray-and-wipe cleaning, electrostatic sprayers create a fine
mist of electrically charged chemical droplets. The sprayed mist
“seeks out” surfaces to be sanitized or cleaned and “wraps” itself
around uncoated surfaces and hard-to-reach areas with minimal
effort. Clean Gate Cordless Electrostatic Sprayers apply a very fine
coating (5- to 80-micron size droplets), so surfaces aren’t drenched
with liquid, meaning virtually any surface can be sprayed.
Warning: If the solution overflows from the mouth of the barrel,
and wets the outer surface of the barrel or the clothes or body of
the operator, it will easily lose the electrostatic adsorption effect and
cause electrostatic leakage to stimulate the skin. Therefore, be sure
to tighten the lid during operation to prevent spillage of the liquid
from the mouth of the bucket. If soluble powder is sprayed, the
pump and nozzle should be cleaned in time, and charged after the
operation. The machine should not use wettable powder.
SAFETY AND OPERATION PRECAUTIONS
1. Pay great attention to the filtration of chemical liquid and water,
so as not to block the nozzle and affect the operation. If the nozzle
is blocked, the particulate matter can be removed and the machine
can be turned on again when the machine is stopped.
2. The operator must understand the performance and protective
methods of the agent used to avoid poisoning accidents caused by
direct body contact with pesticides. Avoid spraying with chemicals
that have a corrosive effect on plastics and metals. Please do not
spray wettable powder to avoid damage to the pump and nozzle
clogging.
CORDLESS ELECTROSTATIC SPRAYER
OPERATION MANUAL AND SPECIFICATION SHEET