How to install
12
●
The body frame is recommended to install in the place where the floor is strong
and flat and the air is circulated well.
▶
If the body frame is installed facing the center of the room, more effective air flow can be created.
• Over 1m from the ceiling
• Over 20cm of left and right direction from the wall
• 30cm of the front
●
Use it indoor with low humidity.
• When the body frame moves or is used for a long time, pull the plug out and dump the water from the water
tank. (It can cause water to overflow and fungi and various germs to increase.)
• Don’t use it with the body frame leaning. It can lead to not working or overflowing.
• Don’t install in a condition which can cause suction port or discharge port.
• Install it in a interval of over 2m in AV device such as TV or radio. (It can cause noise if it is close.)
• In a place where electronic wave can be created such as speaker or electronic cooker, sensor for water
level cannot work and the time of water supply cannot be told exactly.
• Don’t use it next to the place with direct light and heater. It can cause the body frame to be deformed or
discolored.
• Install it in a flat place. If it is installed in a slanted place, water sensor can work and the product can stop
working.
Don’t block the
filter in the side.
Over 20cm
Over 20cm
Over 1m
▶
If humidity nearby is high due to the characteristics of the product, the humidity can be reduced.
