Thank you for buying the WSP60 wall-mount music speaker. Please read and have a thorough understanding
of the entire manual before installation and use. Keep the manual for maintenance.
IMPORTANT
CLB Audio Visual has made every effort to provide accurate and detailed instruction for this product’s
assembly and installation. Should you have any doubts, consult a qualified professional audio installer. CLB
Audio Visual recognizes no liability for any difficulty or problem derived from the interpretation of these
instructions. All brackets, accessories and all supplied parts must only be used for the installation of this
product as described in this information sheet. CLB, its commercial distributors and retailers are not , directly
or indirectly, responsible for any damage to persons and or properties derived from the use of this product in
an unsafe or different way for which it has been designed and constructed.
Several parts of this product are small pieces of hardware, therefore extreme care should be taken to keep
them away from children.
Read these instructions carefully before using the product
1 Where speakers are installed on walls, check that the wall structure provides a reliable fixing point and that
the speaker is firmly attached. The user should be responsible for a safe and correct installation.
2 Do not install the speakers on fine wood or soft wall material, screws can become loose which may result in
the speaker coming away from the wall and possibly cause personal injury.
3 Do not use nails, adhesives or other unauthorized fixing methods. Long-term use and vibrations may cause
non-approved fixing methods to fall easily.
4 Do not place the speakers on a turntable or movable support.
5 Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted.
6 Do not listen to sound at a very high level when you are changing the input source (for example, to tune FM
/CD) Installation or removal of cables - make sure that the power amp / amplifier device is turned off.
7 Do not attempt to clean the speakers with chemical solvents as this may damage the paint surface.
Clean with a dry cloth.
Users have full responsibility to place or install this product safely.
The speakers that are placed in the mounting bracket can be either wall or ceiling mounted. Screws are
recommended to be used to fix the mounting bracket in position.
1. Use the mounting bracket as a template to mark the locations of the hole slots.
2. Then use the appropriate hardware and tools (not supplied) to properly fix the bracket to the wall/ceiling.
3. Place the speakers on the bracket using the screws and washers provided.
Connection
Connect the speaker terminals with appropriate cable to the output of the amplifier.
The speaker wire is normally marked positive (red) and negative (black). Ensure the positive output from
the amplifier is connected to the positive input on the speaker, ensure the negative output of the amplifier is
connected to the negative input on the speaker.
If the polarity of the speakers is reversed, the sound will be unnatural and could cause damage to the product.
www.cie-group.com
Introduction
