manualshive.com logo in svg

Clayton WartHog, Safety, Operation & Maintenance

Share
Download
Clayton WartHog Safety, Operation & Maintenance Download Page 1

WARNING

Respiratory protection is recommended 

operating this equipment.

WARNING

Eye protection is required when operating this 

equipment.

WARNING

Hearing protection is recommended when 

operating this equipment.

WARNING

Read and understand operator’s manual before 

using this equipment.

SAFETY LEGEND

 WARNING

WH-0 

August 03, 2021 

Safety – Operation – Maintenance

Keep this document in a safe place

Read and understand this manual before operating your air tool

•  A HEPA Filter must be installed in this vacuum at all times.

•  If this vacuum is used to collect hazardous material, appropriate personal protective equipment may be required.

•  Any alteration to this equipment by a third party will nullify its warranty.

WartHog WH Power Head

Electric Industrial HEPA Vacuum

Models: WH-105-0, WH-107-0, WH-115-0, WH-202-0, WH-205-0, WH-215-0

•  Designed for toxic dust cleanup, housekeeping, and vacuum sanding

•  Dry Recovery Only

WH-0_cover

Scan this QR code for 

online instructions and 

documentation, or visit

www.ClaytonHowTo.com

Summary of Contents for WartHog



















Reviews:

No comments

Brands by name

Popular brands

Load more brands