11
K-EYE S10 & S20 HCR
TECHNICAL INFORMATION
K-EYE S10 HCR
POWER SUPPLIES
100/240V 50/60 Hz
INPUT POWER
300VA
LIGHT SOURCE
Light sources: 6-color LED modules
LED module: R+G+B+Amber+Cyan+Lime
Number of LEDS: 17
LED life expectancy: min. 50,000h
Typical lumen manteinance: 70%@50,000 hours
Typical CRI value > 97 up to 99
OPTICS
Optics featuring 6-color LED module system +
rod-bar mixing front lens
6°- 50° linear electronic Zoom
COLOR SYSTEM
Color system: R+G+B+Cyan+Amber+Lime LED
module
Color Temperature control: Linear from 2500K to
8000K (CTO controlled mode plus RAGCB
correction)
Control of the colors: RAW mode, HSL mode,
RGB mode, CMY mode
- RAW mode Enable specific control of each
color
- HSL mode function is based on algorithm. HSL
parameters: HUE, HUE fine, Saturation,
Crossfade, Path, Tint
- RGB mode The projectors works in the same
way as a classical RGB fixture
- CMY mode The projectors works in the same
way as a classical CMY fixture
Halo Emulation 750W, 1000W, 1200W, 2000W,
2500W lamp emulation
Gamma Wave: Different chromatic curves for
each color
Macro: Dedicated color macro channel with 80
preselected colors
EFFECTS SECTION
Electronic and linear dimmer, 16 bit
Strobe 24 flash/sec. Electronic, instant open and
blackout. Variable speed pulsation
CONTROL AND PROGRAMMING
27 DMX 512 control channels
Control signal: USITT DMX 512
Protocols: RDM, WebServer and Art-Net
Display: Graphic LCD backlit b/w display
Display battery: Long life self-charging buffer
battery
Pan/Tilt Resolution 16 bit
Dimmer Resolution 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input
and output
Firmware update: Software upload through DMX
input
BODY
Structure in aluminium with die-cast plastic cover
Optional frame for external gels and frost filters
Optional top hat (adjustable with the Zoom
movement)
ELECTRONICS
Long-life auto-charging buffer battery
Preset color and graphic effect macros
Function reset controllable from a central control
unit
Menu-driven internal self-test function
Electronic check-up of every single parameter
with error alarm
DMX level monitoring on each channel
Automatic internal data transmission error
diagnostics
Firmware upgrade with no power
Firmware transfer from one light to another
SAFETY DEVICES
Minimum distance of illuminated objects: 0.2
meters (8”)
Minimum distance from flammable materials: 0.2
meters (8”)
Max ambient temperature: 40°C (104°F)
Max temperature of the external surface: 90°C
(194°F)
Bipolar circuit breaker with thermal protection
Automatic break in power supply in case of
overheating
Forced ventilation withaxial fans
CE MARKING
In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment
supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility
(EMC)
• 2011/65/EU - Restriction of the use of certain
hazardous substances (RoHS)
• 2009/125/EC - EcoDesign requirements for
Energy-related Products (ErP)
WEIGHT
12 Kg (26.45 lbs)
CAUSE AND SOLUTION OF PROBLEMS
THE PROJECTOR WILL NOT SWITCH ON
PROBLEMS
ELECTRONICS NON-OPERATIONAL
DEFECTIVE PROJECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES
CHECKS AND REMEDIES
No mains supply.
LED exhausted or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Lenses broken
Dust or grease deposited.
Check the power supply voltage.
Call an authorised technician.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
461
(18.15")
239
(9.41")
Zoom OUT
221
(8.70")
Zoom IN
357
(14.05")
300
(11.81")
320
(12.60")
437
(17.20")
265
(10.43")
