4
REFLECTXION
4
Connecting and disconnecting power cable - Fig. 6
Control panel - Fig. 5
Installing the fixture - Fig. 4
The fixture can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: with the exception of when the fixture is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request).
This must be securely fixed to the support structure of the fixture and then connected to the fixing point at the centre of the base.
Main
Switch
PowerCon
True 1
IN
DMX
5 pin
IN
Ethernet
PowerCON
True 1
OUT
DMX
5 pin
THRU
Display
Functional buttons
2
1
1
2
3
5
6
3. INSTALLATION AND START-UP
3.1 Installing the fixture
3.2 Connecting to manis supply
Summary of Contents for CA3000
Page 11: ...11 REFLECTXION ...
