16
SCENIUS PROFILE
2
A
1
A
3
A
Upper Side
Lower Side
21
22
2
1
20
Lamp change - Fig 21
Take the new lamp out of its package and insert in the fitting.
WARNING:
do not touch the lamp’s envelope with bare hands.
Should this happen, clean the bulb with a cloth soaked in alcohol
and dry it with a clean, dry cloth.
CAUTION: Fast lamp ON-OFF cycles (for example 10 minutes ON /
10 minutes OFF) will reduce the lamp life.
ATT200/001 is the part number of a CP tool, that could help you to take off the lamp from the fixture.
Lamp regulation - Fig. 22.
To centre the lamp, turn the three adjusting screws as shown in the figure.
Opening and closing lamp compartment - Fig. 20
HOT SPOT
