11
K-EYE HCR
TECHNICAL INFORMATION
496
(19.53")
387
(15.24")
292
(11.50")
438
(17.24")
257
(10.12")
391
(15.39")
224
(8.82")
Zoom IN
274
(10.79")
Zoom OUT
K-EYE K10 HCR
General Information
• Advanced Led Washlight Moving Head
• Light sources: 19 led six colors module
• 6ch’s LED: RGB+Amber+Cyan+Lime system
(20,000 h)
• 12 channels dedicated to individual color control
• 2500K-7500K Color temperature correction
(CTO controlled mode plus RAGCB correction).
• Macro Color dedicated channel
• Additional Color control functions: HSL (Hue
Saturation Luminosity).
• Software algorithm by Osram
• CRI>98 over the CCT
• Total lumen output: 11,000 lumen (K20 version);
5,500 lumen (K10 version)
• 6°- 50° linear zoom
• Electronic Linear Dimmer, 16 bit
• Protocols/Functions: RDM, Web Server, ArtNet
• Totally flicker free
Power supplies:
• 100/240V 50/60 Hz
• Automatic power supply
Input power:
450 VA
Light source:
Led LM6C module 6 colors high CRI
Motors:
• Movement by means of two steppers motors,
controlled by microprocessor
Control inputs:
DMX 512
Moving body:
Automatic repositioning of TILT after accidental
movement not controlled by control unit.
• PAN
Angle rotation: 540°
• TILT
Angle rotation: 210°
IP rating:
• IP20
• Protected against the entry of solid bodies
larger than 12mm (0,47”)
• No protection against the entry of liquids
Cooling:
Forced ventilation with fans and heat sink
Working position:
• Any working position
• Hanging system: with fast-lock omega clamps
(1/4 turn) on the base
Control and programming:
• DMX protocol signal: USITT DMX 512
• Display: Graphic LCD backlit b/w Display
• Pan/Tilt Resolution: 16 bit
• Dimmer Resolution: 16 bit
• Movement Control:Vectorial
• DMX signal connection: 5 pole XLR input and
output
• Software upload through DMX input
Electronics:
• Long life self-charging buffer battery
• Function reset controllable from a central
control unit
• Menu-driven internal self-test function
• Electronic monitoring of every single parameter
with status error
• Cooling system monitoring
• DMX level monitoring on all channels
• Internal data transmission diagnostics
• Firmware upgrade with no power
• Firmware upload from another fixture