7
The products referred to in this manual comply with the European
Community Directives governing:
• Low voltage 73/23
• Electromagnetic compatibility 89/336
WIRING DIAGRAMS
8
TECHNICAL DATA
7
ELECTRICAL/MECHANICAL
CHARACTERISTICS
Power supply
V.I.P. HTI 300
• 220 - 240V 50Hz
• 200V 50Hz - 230V 60Hz
• 200V 60Hz
• 120V 60Hz
V.I.P. 250 HAL
• 200 - 240V 50/60Hz
• 100 - 120V 50/60Hz
S.I.P. 300 HAL
• MAX 240V 50/60Hz
Lamps
• HTI 300W metal iodide
- Colour temperature 6500 K
- Luminous flux 20,000 lumen
- Fitting SFc 10-4
- Duration 750 h
• 24V 250W halogen
- Colour temperature 3450 K
- Luminous flux 9,000 lumen
- Fitting G6.35
- Duration 300 h
• M38 300W halogen
- Colour temperature 2,900 K
- Luminous flux (120V) 5,500 lm
- Luminous flux (230V) 5,000 lm
- Fitting GY9.5
- Duration 2000 h
Power uptake
• V.I.P. HTI 300 : 800VA (230V 50Hz)
• V.I.P. 250 HAL: 260VA (230V 50Hz)
• S.I.P. 300 HAL: 300VA (120V 60Hz)
OPTICAL SYSTEM
Optical unit
- Base in die-cast aluminium.
- Twin lens condenser.
- High output parabolic mirror.
Objectives
• Standard: 1:2,4/100 mm
• Optional: 1:4/165 mm
• Optional: 1:2,8/85 mm three-lens
• Optional: 1:3,5/70÷120 mm zoom
CONSTRUCTION CHARACTERISTICS
Safety devices
- Power switches off automatically in the
event of overheating (V.I.P. only).
- Power switches off when the cover is
opened (V.I.P. HTI 300 only).
- Short circuit protection on effects guides.
Cooling
Forced ventilation by means of axial flow
fans (V.I.P. only).
Housing
In extruded, die-cast aluminium, painted with
epoxy powder paint.
Support
- Steel mounting painted with epoxy powder
paint.
- Three installation positions 25 mm apart.
- Mounting adjustable through 120°.
Working position
- Works in any position.
Maintenance
- Easily accessible interior, thanks to large
size of opening cover.
Dimensions and weights
• V.I.P. HTI 300
- 210x480x130 mm
- 7,1kg
• V.I.P. 250 HAL
- 210x480x130 mm
- 6,8 kg
• S.I.P. 300 HAL
- 210x360x130 mm
- 2,0 kg
E
N
fuse
L
fuse
SW
FAN
230V
200V-60Hz
Bth60
480mA
PTC
24V
50/60Hz
20VA
IGNITOR
N
L
230V-50Hz
200V-50Hz
MSW
t
BALLAST
D
M
M
M
M
V.I.P. HTI 300
Bth60
480mA
PTC
E
N
fuse
L
fuse
FAN
SW
MSW
t
IGNITOR
50/60Hz
24V
20VA
120V
N
L
D
120V/60Hz
M
M
M
M
V.I.P. HTI 300 (120V 60Hz)
E
N
fuse
FAN
L
fuse
SW
24V-250W
LAMP. ALO.
PTC 480mA
TRAS.
D
C
A
B
Bth60
t
M
M
M
M
120V 50/60Hz
110V 50/60Hz
100V 50/60Hz
V.I.P. 100-120V
B
C
D
POS.
A
FIG.
V.I.P. 200-240V
TRAS.
001
220V 50/60Hz
240V 50/60Hz
230V 50/60Hz
002
200V 50/60Hz
TRAS.
M= Motor
V.I.P. 250W HALOGEN
E
N
L
LAMP. ALO.
M38-300W
S.I.P. 300W
REACTIVE MAINTENANCE
6
No mains electricity supply.
Check that power is available at the
mains socket and/or the conductivi-
ty of the fuses.
Lamp worn or faulty.
Change lamp.
(See instructions).
No voltage to effects guides.
Contact an authorised technician.
Effects motors don’t work.
Contact an authorised technician.
Lenses broken.
Contact an authorised technician.
Deposit of dust or grease.
Clean.
(See instructions).
Lens dirty.
Clean.
(See instructions).
MOTORISED EFFECTS NOT WORKING (V.I.P.)
PROJECTOR DOES NOT COME ON
PROJECTION FAULTY
FAULTS
REDUCED BRIGHTNESS
RINGS APPEAR AROUND PROJECTION
POSSIBLE CAUSES
CHECKS AND
CORRECTIVE ACTION
•
•
•
•
•
•
•
•
•
The contents of this manual are not binding. In line with its strategy of constant product evolu-
tion, Clay Paky reserves the right to alter the characteristics described in this manual without
notice.
