Clay Paky MYTHOS C61391 Instruction Manual Download Page 13

13

MYTHOS

TECHNICAL INFORMATION

380

(14.96")

420

(16.53")

396

(15.59")

Lens IN

611 (24.05")

Lens OUT

628 (24.72")

570

(22.44")

Lens OUT

427 (16.81")

Lens IN

408 (16.06")

Lens IN&OUT

455 (17.91")

Power supplies
• 115/230V 50/60 Hz
• Automatic Power supply switching

Input power
700VA at 230V 50Hz

Total lumen output
Max 24.000 lumens

Light source
470W discharge lamp
- Type: Philips MSD Platinum 20R
- Color Temperature: 7.800 K
- Life: 1,500hrs
- Luminoux flux: 23.000 lm
- Cap by faston TM 250 (6.35 mm)

Motors
20  stepper  motors,  operating  with  microsteps,
totally microprocessor controlled.

Channels
30/34 control channels.

Inputs
• DMX 512
• Ethernet

Moving body
Automatic  repositioning  of  PAN  and  TILT  after
accidental movement not controlled by control unit.

PAN
• Angle Rotation: 540°
• Fast speed: 3.517 sec
• Normal Speed: 4.038 sec
• Resolution PAN: 2.11°
• Resolution PAN FINE: 0.008°
Accuracy:
Resolution ± 0,3° (Range 0,6°)

TILT
• Angle Rotation: 244°
• Fast speed: 2.180 sec
• Normal Speed: 2.274 sec
• Resolution TILT: 0.96°
• Resolution TILT FINE: 0.004°
Accuracy:
Resolution ± 0,3° (Range 0,6°)

Noise level
50 dBA

Weight
32 Kg (70.54 lbs)

IP rating
• IP20
• Protected  against  the  entry  of  solid  bodies

larger than 12mm (0.47”).

• No protection against the entry of liquids.

Safety devices
• Bipolar circuit breaker with thermal protection.
• Automatic  break  in  power  supply  in  case  of

overheating  or  failed  operation  of  cooling
system.

Cooling
Forced ventilation with fans.

Body
• Aluminium structure with plastic cover.
• Two side handles for transportation.
• Device  locking  PAN  and  TILT  mechanisms  for

transportation and maintenance.

Working position
• Any Working Position
• Hanging  system:  with  fast-lock  omega  clamps

(1/4 turn) on the base

Optics
• 157mm diam. front lens
• Electronic  focusing  for  a  perfectly  sharp  light

beam along its entire length

• Zoom  ranging  from  4,5°  to  30,8°  for  fixed

gobos sharp focusing

• Zoom  range  from  6,5°  to  47,3°  for  rotating

gobos sharp focusing

• BEAM  mode  with  2,5°  aperture  and  “pipe”

effect

Color system
• CMY color system based on 3 gradually fading

color wheels

• 11 color filters on three wheels
• 2  CT0  filters  (3,200K  and  2,500K)  +  1  CTB

filter

Effects section
• 2 gobo wheels
• Wheel  with  6  HQ  dichroic,  indexable  and

interchangeable rotating gobos.

• Interchangeable  and  variable  rotation  wheel

with 18+1 fixed metal gobos (including 6 beam
reducers).

• Selectable gobo-shake function
• Advanced Visual Effect Disc (Animation disc)
• 2  indexable  and  interchangeable  rotating

prisms (8-facet and linear prism)

• Frost unit to soften the beam edge
• 0-100% Mechanical dimmer
• Mechanical  shutter  and  adjustable  speed

strobe effect

Control and programming
• 30/34 DMX 512 control channels
• DMX protocol signal: USITT DMX 512
• Display: Graphic LCD backlit b/w Display
• Pan/Tilt Resolution: 16 bit
• Gobo Indexing Resolution: 16 bit
• Focus Indexing Resolution: 16 bit
• Dimmer Resolution: 16 bit
• Movement control: vectorial
• DMX signal connection: 3 and 5 pole XLR input

and output

• Software upload through DMX input

Electronics
• Long life self-charging buffer battery.
• Pre-set macros.
• Function reset from control unit
• ON/OFF lamp control from the lighting desk.
• Function reset from the lighting desk.
• "AUTOTEST" function from menù
• ETHERNET Ready.
• Electronic monitoring with status error
• Cooling system monitoring
• DMX level monitoring on all channels
• Internal data transmission diagnostics
• Firmware Upgrade with no power
• Firmware upload from another fixture

Summary of Contents for MYTHOS C61391
















Reviews: