How to Measure the Relative Altitude
• The Watch can measure relative altitude. For example,
it can measure the ascending or decending altitude
between the starting point and the finish point of a trail.
• When the Track mode is selected, the icon “TRK” will
appear on the screen.
• To start measure the ascending or descending altitude
of a trail, hold [L/R] to reset the reading to zero and
press [S/S] to start tracking at the starting point of a trail.
The flashing “ ” indicator will be shown on the display.
• You can check the reading at any point you like and it
shows the altitude relative to the starting point.
• When you finish the Tracking, press [S/S] to stop the
function.
Track Mode
• Press [L/R] to recall the maximum height/temperature,
minimum height/temperature, accumulated ascent
altitude, accumulated descent altitude as adjacent
diagram.
Update Rate
• The watch will updated the reading automatically.
• For the first 5 minutes, when the Track mode is
selected, it will updated every second.
• Will update every 10 seconds in the next 24 hours.
• Afterwards, it will update every minute.
10.0 Track Mode
current
temperature
function is ON
max
track altitude
min
Track Altitude
Display
Max Altitude
Display
Reset Display
Min Altitude Display
Accumulated
Ascent Altitude Display
Accumulated
Descent Altitude Display
[L/R]
[L/R]
[L/R]
[L/R]
[L/R]
hold [L/R]
Track Mode
Summary of Contents for Mission Sensor
Page 1: ...Instruction Manual...
Page 2: ...www clawgear com...
