Clavia Nord Drum 3P User Manual Download Page 19

FCC Information (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications 

not expressly approved by Clavia may void your authority, granted by the FCC, to use the product.

2. IMPORTANT:

 When connecting this product to accessories and/ or another product use only high quality shielded cables. 

Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void 

your FCC authorization to use this product in the USA.

3. Note: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will 

not occur in a particular installation. If this equipment is found to be the source of interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:
 

– Reorient or relocate the receiving antenna.

 

– Increase the separation between the equipment and receiver.

 

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.

           For 

Canada

NOTICE

This Class B - digital apparatus complies with Canadian ICES-003.

AVIS

Cet appareil numérique de la classe B - est conforme à la norme NMB-003 du Canada.

DECLARATION OF CONFORMITY 

Compliance Information Statement

 

 

Model Name: Nord Drum 3P

 

 

Type of Equipment: Digital drum unit

 

 

Responsible Party: Clavia DMI AB

 

 

Address: P.O. BOX 4214. SE-102 65 Stockholm Sweden

 

 

Telephone: +46-8-442 73 60

Summary of Contents for Nord Drum 3P





















Reviews: