Clavia ddrum4 Owner'S Manual Download Page 2

Warning - When using electric products, basic precautions
should always be followed, including the following:

1.

 Read all the instructions and observe the graphic symbols

above before using the product.

2.

 Do not use this product near water - for example near a

bathtub, washbowl, kitchen sink, in a wet basement, near or
in a swimming pool, a swamp or the like.

3.

 This product should be used only with a cart or a stand that

is recommended by the manufacturer.

4.

 This product, either alone or in combination with an

amplifier and headphones or speakers may be perfectly
capable of producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a
high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should
consult an audiologist.

5.

 The product should be located so that its location or

position does not interfere with or obstruct its normal flow of
ventilation.

6.

 The product should be located away from heat sources such

as radiators, heat registers or other products that produce
heat.

The lightning flash with the arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

Le symbole éclair avec le point de flèche à l´intérieur d´un triangle
équilatéral est utilisé pour alerter l´utilisateur de la presence à
l´intérieur du coffret de ”voltage dangereux” non isolé d´ampleur
suffisante pour constituer un risque d`éléctrocution.

The exclamation mark within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

Le point d´exclamation à l´intérieur d´un triangle équilatéral est
employé pour alerter l´utilisateur de la présence d´instructions
importantes pour le fonctionnement et l´entretien (service) dans le
livret d´instructions accompagnant l´appareil.

Instructions pertaining to a risk of fire, electric shock or injury to persons.

IMPORTANT SAFETY INSTRUCTIONS

S

SS

SSA

A

A

A

AVE THESE INSTRUCTIONS

VE THESE INSTRUCTIONS

VE THESE INSTRUCTIONS

VE THESE INSTRUCTIONS

VE THESE INSTRUCTIONS

CAUTION 

AVIS

RISK OF ELECTRIC SHOCK

DO NOT OPE

N

RISQUE DE SHOCK ELECTRIQUE

NE PAS OUVRIR

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

ATTENTION

:POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.

AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L´USAGER.

CONFIER L´ENTRETIEN AU PERSONNEL QUALIFE.

AVIS

: POUR EVITER LES RISQUES D´INCIDENTE OU

D´ELECTROCUTION, N´EXPOSEZ PAS CET ARTICLE A LA PLUIE

OU L´HUMIDITET.

7.

 The product should be connected to a power supply only

of the type described in these operation instructions or as
marked on the product.

8.

 The power supply cord of the product should be unplugged

from the outlet when the product is left unused for a long
period of time.

9.

 Care should be taken so that objects do not fall, or liquids

are not spilled into the enclosure through openings.

1

0.

 The product should be serviced by qualified service

personnel when:

A.

 The power supply cord has been damaged; or

B.

 Objects have fallen or liquids have been spilled

     onto the product; or

C.

 The product has been exposed to rain; or

D.

 The product does not appear to operate normally or

    exhibits a marked change in performance; or

E.

 The product has been dropped or the enclosure

    has been damaged.

11.

 Do not attempt to service the product beyond those

means described in this operating manual. All other
servicing should be referred to qualified service personnel.

Trademarks: 

The 

ddrum brand and

 logo 

are

 registred trademark

s

 of Clavia DMI AB. All other

trademarks mentioned in this publication are the properties of their respective holders.

Specifications and appearances are subject to change without notice.

Copyright by Clavia DMI AB, 2001

Summary of Contents for ddrum4








































Reviews: