Consort Equipment Products Limited
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 Fax: 01646 695195
Email: [email protected] Web: www.consortepl.com
Operation hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
BS EN ISO 9001 Registered Company No FM12671
41001555 Iss 02
SL Receiver Installation
The heater is supplied with the SL wireless receiver pre-
wired. The cable length is approximately 0.9m. The
receiver should be screwed to the wall with 2x screws
and suitable wall plugs. Care should be taken when
installing the receiver. It must not be positioned
above, behind or below the heater.
The receiver has an LED plugged into the side of it.
this can be used for indication and to see the heat-
er’s current status. The LED is optional, the receiver will
operate regardless.
Technical information
Output
250w
Voltage
230v
Amps
1.09A
Max surface temp
110
⁰
c
Size
590x590mm
Weight
4.7Kg
C
USTOMER
H
ELPLINE
Should you need any advice on the use of your new Consort product,
please contact our Helpline:
4
Operation
When the appliance is connected to the mains
supply, the LED indicator will light up green,
showing that the power is available to the unit.
When the heat output has been enabled by a
controller, the LED indicator light will turn red.
This heater must be used in conjunction with an
SL wireless controller
. Each SL controller can
control any number of heaters providing they
are in the RF range.
Please refer to the SL user and operating instruc-
tions for full operational details.
