clatters GARDEN LISTENER, Manual, Page: 9 / 20

8
5. Calibration
The Garden Listener needs to be calibrated in order to function properly.
A good calibration ensures the right conversion of MIDI notes into CV signals.
CALIBRA
TION
05
CALIBRA
TION
CALIBRA
TION
Keep pressed the encoder (F) on the back of the module while
powering up your system until a small LED indicated by a circle on the
PCB will start flashing, release the encoder and the LED will stay on: this
indicates that you have just entered the calibration mode.
Use a multimeter to measure the Vout on the two pin headers located on
the back of the module, turn the encoder until you reach exactly 3V;
the more digits your device has, the more accurate the calibration will be.
If you do not have a multimeter, patch the Garden Listener CV out to one
of your oscillators, use a tuner and turn the encoder until you reach a
perfect C2.
Press the encoder again to exit the calibration mode.
Now your Garden Listener is ready. Leave those LFOs alone, and let
any living conductive being modulate your signals!