•
First use the four screws to attach the mounting plate which is on top of the
device and which is released from the fixing device by pressing strongly
towards the rear.
•
Attention! If other screws are to be used because the wall is not thick enough,
these screws may break through the cabinet in certain circumstances!
•
Now insert the radio into the assembly plate mounting plate (four hooks) and
press it to the rear until it locks in place.
Overview of Parts
1. Station scale
7. Function selector switch
2. Function button
(RADIO ON/OFF/AUTO)
- alarm time (ALARM)
8. Display
3. Function button
9. TUNING control
- set time (TIME)
10. BUZZER/VOLUME control
4. Function selector switch
11. Throw-out aerial
(OFF/TIMER/ON)
12. LED display for activated
5. Hours button (HOUR)
alarm function (AUTO)
6. Minutes button (MIN)
13. LED display radio operation
14. Battery compartment
Inserting the power reserve batteries
(not supplied)
If there is a power cut or the mains plug has been removed from the power socket,
the settings will be retained if the power reserve batteries are inserted.
•
Open the lid of the battery compartment (14) on top of the device.
•
Insert 1 block battery of type 6 LR 61 AM6 or C. Ensure the correct polarity. If
the machine is not used for a prolonged period, please remove the batteries in
order to avoid "leakage".
Please do not dispose of used batteries in the normal domestic waste.
Old batteries should be returned for environmentally-friendly disposal.
Putting into Operation
1. Insert the plug into a properly installed 230 V, 50 Hz earthed socket.
2. Push the RADIO ON/OFF/AUTO switch (7) to ON.
3. By turning the TUNING knob (9), the desired radio station can be selected. The
tuned radio station will be displayed on the tuning scale (1).
4. The volume can be adjusted with the BUZZER/VOLUME knob (10).
5. In order to switch off the device, move the RADIO ON/OFF/AUTO switch to
OFF. The display indicates furthermore the current opposed time.
22
GB
5....-05-KRC 544 (I_ CZ) 09.12.2002 12:50 Uhr Seite 22
