Clatronic DB 3016, Instruction Manual

Page: 39 / 66

GB
39
Overview of the Components
1 Continuously adjustable 6 Filler opening for the water tank
temperature regulator 7 Spray nozzle
2 Control lamp 8 Transparent water containe
r
3 Steam jet button 9 Base
4 Steam volume regulator 10 Stainless Steel Soleplate
5 Spray button 11 Flexible line cord entry
First Use of the Machine
• Clean the ironing base with a slightly damp cloth.
• Fill the water reservoir at the refi ll opening (6), using a fi lling container. Close the lid
of the tank so that it locks in place. Preferably use distilled water or clear tap water
(maximum water hardness level 2). If water is harder, used distilled water only.
• Do not fi ll battery water, water from the clothes dryer and water containing additives
(such as starch, perfume, softener or other chemicals) into the water reservoir. This
could damage the iron due to residues forming in the steam chamber. These residues
may cause impurities to the fabric when dropping out of the holes in the soleplate.
Using the Machine
Note: Only clothes should to be ironed with this machine.
• Remove any protective fi lms and adhesive labels from the stainless steel soleplate
before using the appliance.
• Completely unwind the line cord.
Ironing without steam (steam jet regulator on 0 )
1. Place the iron on its stand.
2. Turn the steam regulator (4) to
0 .
3. Electrical connection:
Make sure that the iron voltage (see name plate) and the line voltage match.
4. Always set the temperature control to „ 0 “ before connecting the appliance to a power
point, or before disconnecting it.
5. Sort out the garments according to their ironing temperatures. Start with the lower
temperatures. It is set with the thermostat (1):
• Synthetics, silk low temperature
• • Wool medium temperature
• • • Cotton, linen high temperature
MAX maximum temperature
05-DB 3016 39 12.04.2006, 11:03:44 Uhr