Clatronic BS 1247, Instruction Manual & Guarantee

Page: 61 / 102

GB
61
Overview of the Components
1 Vacuum hose 9 Floor nozzle
2 Hose connection 10 Cable-winding key
3 Telescopic suction tube 11 Carrying handle
4 Coupling 12 Air slide (not shown)
5 Button for releasing the 13 Cover of outlet fi lter
new dust container
6 Dust container with fi lter insert
Accessories:
7 On/off switch „2-in-1“ nozzle
8 Parking assistance (groove and brush nozzle)
Start-up
• Insert the connection head of the suction hose into the hose connector until it
locks in place. To do so, please press the buttons simultaneously. In order to
release the hose again, please press the buttons once more on the connection
head.
• Keep the buttons pressed down and then pull out the hose.
• Insert the vacuum tube into the handle if required.
Using the Appliance
1. Fit on the accessory.
2. Unwind the necessary length of cable and insert the plug in a duly installed
230V/50Hz protective contact socket.
3. Vacuum at a steady speed. There is no need to exert pressure.
4.
Attention: pay attention to the range that can be covered with the cable
length.
Cable winding device
Pull out the cable up to the maximum length indicated with the yellow mark. Never
pull the cable out up to the red mark as the cable winding can be damaged. Said
damages are not covered by the warranty.
Winding
Press the cable winding button and guide the cable. Hold the cable to avoid
wrapping.
05-BS 1247 neu 61 30.08.2005, 15:45:09 Uhr