14
o
IMPORTANT: You must observe the ventilation requirements shown in
the drawing above. In particular the 20 mm gap underneath the hob
and the 5 mm gap underneath the front edge of the worktop.
o
IMPORTANT: There are ventilation holes
around the outside of the hob. YOU MUST
ensure that these holes are not blocked by the
work top, when you put the hob into position
(see drawing opposite).
o Carefully turn the hob upside down and place
it on a cushioned mat.
o
IMPORTANT:
Do not use a silicon sealant to seal the appliance against the
aperture. This will make it difficult to remove the hob from the aperture in
future, particularly if it needs to be serviced, and may void the warranty.
Summary of Contents for CLS64K
Page 22: ...20...