Classique CLO64XLSS, User Manual, Page: 16 / 24

14
Replacement of the oven light bulb
In order to avoid the possibility of an electric shock ensure that the appliance
is switched off before replacing the bulb.
1. Remove all oven shelves, the drip tray and the side rack that is on the
same side as the oven light.
2. Using a screwdriver, remove the lamp cover.
3. Remove the light bulb and replace it with a halogen lamp.
4. Replace the bulb with another 230V, 25W/ 300°C, cap G9.
5. Do not use any other type of bulb.
6. Place the lamp cover back into position.
7. There is a curve on one side of the lamp cover; this should be on the
right hand side as the cover goes back into place.

Make sure it is properly inserted into the ceramic socket. Do not touch the
light bulb directly with your hands.
Door removal

The hinges (A) have two moveable bolts on them (B). If you raise both of the
moveable bolts (B), then the hinges (A) are released from the oven housing.

Gripping the sides of the door at the centre, incline the door
slightly towards the oven cavity. Pull the door gently
away from the oven cavity.

Make sure that the door is supported at all times and that you place the door
on some padded material whilst cleaning it. The oven door and door glass
should only be cleaned using a damp cloth and a small amount of detergent.
The cloth must not have come into contact with any form of cleaning product
or chemical previously. To refit the door, slide the hinges back into their slots
and open the door fully. The moveable bolts (B) must be closed back into
their original positions before closing the door.
A
B