INSTALLATION
TRANSMITTER
1.
Connect the mains adapter provided to an electrical outlet.
2.
Connect the mains adapter cable to the DC IN input connector located on
the transmitter rear panel.
3.
A cable is provided from the transmitter rear panel that can be
connected to
the audio outputs (Left and Right) present on a TV set, Hi-Fi system, VCR or
radio-cassette player, or to a headphones/earphones output using the
connector supplied.
The red Auto On indicator light will light up as soon as you have connected the
power adapter to the mains outlet and the audio cable to a signal source. If the
Auto On indicator light remains off, switch on the audio source and increase its
output level until the red indicator light comes on.
HEADPHONE
1.
Two rechargeable LR03/AAA size batteries have been built-in in the battery
compartment and no insertion is required.
OPERATION
1.
Switch on the sound source (TV set or audio component) that the
transmitter is connected to.
2.
Place the headphones On/Off switch in the On position.
3.
Place the headphones on your head and adjust the volume to obtain the
desired sound level.
4.
If you cannot find the best reception frequency, press the "Auto Scan"
button on the headphones. The corresponding indicator light will come on.
