_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)
Page-31
October 20, 2004
Table 11: Piston programming functions (cont’d)
Name
Steps
Function
VELOCITY
SENSING
ON/OFF
Hold 1
st
piston from
the left (SET) and 4
th
black key from the
left (G#1) to turn off
velocity sensing.
Hold 1
st
piston (SET)
and 5
th
black key
from the left (A#1) to
turn on velocity
sensing. Afterwards,
release the SET
piston.
Velocity sensing produces a different volume level
corresponding to the force with which a key is pressed.
To conform to traditional organ consoles which are not
velocity sensitive, the CMK permits users to disable
velocity sensing in the keyboard.
ANALOG
INPUT –
VOLUME
SETUP
Hold the 1
st
piston
from the left (SET)
and the 6
th
black key
from the left (C#2).
Then select any
combination of the 1
st
16 white keys from
the left (C1 to D3).
Afterwards, release
the SET piston.
Sets the output MIDI channels for the volume analog
input. For example, if we configure the analog input to
produce General MIDI volume information on channels
1, 3 and 5, then all MIDI events originating from that
analog input will produce MIDI messages transmitted on
these three channels. Please note that the crescendo input
does not require setup because it produces messages for
the Ahlborn Archive modules.
DISABLING
ANALOG
INPUT –
VOLUME
Hold the 1
st
piston
from the left (SET)
and the 6
th
black key
from the left (C#2).
Afterwards, release
the SET piston.
MIDI messages describing volume information from the
analog input will not be transmitted on any MIDI
channel.
ANALOG
INPUT –
EXPRESSION
SETUP
Hold the 1
st
piston
from the left (SET)
and the 7
th
black key
from the left (D#2).
Then select any
combination of the 1
st
16 white keys from
the left (C1 to D3).
Afterwards, release
the SET piston.
Sets the output MIDI channels for the expression analog
input. For example, if we configure the analog input to
produce General MIDI expression information on
channels 1, 3 and 5, then all MIDI events originating
from that analog input will produce MIDI messages
transmitted on these three channels. Please note that the
crescendo input does not require setup because it
produces messages for the Ahlborn Archive modules.
DISABLING
ANALOG
INPUT -
EXPRESSION
Hold the 1
st
piston
from the left (SET)
and the 7
th
black key
from the left (D#2).
Afterwards, release
the SET piston.
MIDI messages describing expression information from
the analog input will not be transmitted on any MIDI
channel.
