E-5
E-5
K
R
Q1
Q1
Center Back Panel
R
Side
Back
Panel
Side
Back
Panel
14. Locate Side Back Panel (R) and Center
Back Panel (K), attach to the back of the
completed assembly from step 13. Use a
Phillips Head screw driver, tighten screws
(Q1) through the pre-drilled holes in the
Back Panels to the completed assembly.
L
M
Mantel/Top
G
N
N
N
N
12. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 11. Then locate
Mantel/Top (G) and lay f nished side up on
top of completed assembly. From the inside,
attach Mantel/Top (G) using Bolt (L) and
Washer (M) through the pre-drilled holes in
the mounting blocks.
HAND
TIGHTEN
ONLY.
13. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
