© 2018
Step 2 of 6
Order #XXXXX
TF-513 Backwall Assembly
1A
1
11
11A
13
13A
12A
12
Item
1,1A
11,11A
12,12A
13,13A
Qty.
2
1,1
1,1
1,1
Description
Base Plate
47.5” S44 Vertical Extrusion
47.5” S44 Vertical Extrusion
26” Z45 Horizontal Extrusion
Steps:
1) Connect verticals [11 to 11A] and [12 to 12A]. See
Extrusion Connector
detail.
2) Attach base plate [1] to vertical [11] and [1A] to vertical [12], using bolt.
3) Connect horizontals [13] and [13A] between vertical assemblies [11/11A] and [12/12A].
4) Connect assembled Aero frame to key hole on vertical [11A] and rest o
n nylon insert o
f [1A].
See
Aero Frame to Vertical Extrusion Connection
detail.
BACK VIEW
Assembled Aero Frame
Nylon
Insert for
Aero Frame
*
*
Keyhole
Aero Frame
Insert bolt of Aero frame into keyhole of vertical
extrusion [11A], then slide Aero frame down to secure.
Aero Frame to Vertical
Extrusion Connection
Bolt Attached
to Aero Frame
*
V20 Connector
11A
Keyhole
11A
*
Set Screws
Connector
Extrusion Connector
Slide upper extrusion
over connector and
rest on lower extrusion.
Secure with set screws.
*
To prevent product loss,
keep all screws attached
to connector after
disassembling.
