30
Setup
PITCH BEND
This determines the pitch bend range and the voice part for applying the pitch bend.
Changing the pitch bend range.
Specified the maximum change in a tone that can be applied using the
PITCH BEND
wheel. Press and
hold down the
SHIFT
button and press the
PITCH BEND UP
or
DOWN
button.
The Pitch bend pop-up display appears and shows current value.
You can adjust the value by using the
DATA UP
and
DOWN
buttons instead of the
PITCH BEND UP
and
DOWN
buttons.
The value can be changed by pressing
PITCH BEND UP
and
DOWN
buttons.
The default value is 2, which is 2 seminotes. The setting range is 00(no change) to 12 (12 seminote)
Whenever press both
PITCH BEND UP
and
DOWN
buttons, default value '2' is set automatically.
Backing Up adjusted value.
The last adjusted value of each Function can be retained in memory.
If the
DISPLAY HOLD
is on, the pop-up display does not return to the main menu and the LCD screen shows the current pop-up
display.
The value can be changed by pressing
PITCH BEND UP
and
DOWN
buttons.
You can adjust the value by using the
DATA UP
and
DOWN
buttons instead of the
PITCH BEND UP
and
DOWN
buttons.
Default value
MAIN VOICE : ON, LAYER VOICE: ON, SPLIT VOICE: OFF
Whenever press both
PITCH BEND UP
and
DOWN
buttons, default value of the selected voice part is set automatically.
Backing Up adjusted value.
The last adjusted value of each Function can be retained in memory.
If the
DISPLAY HOLD
is on, the pop-up display does not return to the main menu and the LCD screen shows the current pop-up
display.
Applying the pitch bend to each voice part.
During the LCD screen shows the pitch bend pop-up display, press the
ENTER
button.
The cursor goes to the voice part option.
You can set voice part for applying the pitch bend by using the PITCH BEND UP and DOWN keys.
PEDAL
One of 8 pedal-functions can be assigned to the assignable pedal.
Press and hold down the
SETUP/KEYPAD
button and press the
PEDAL
button.
The pedal pop-up display appears and shows current touch value.
Press the
PEDAL
button again, the cursor goes to the next pedal function and the selected function is set to the assignable pedal.
Instead of the
PEDAL
button, the setting value can be changed by the
DATA UP
and
DOWN
buttons.
Assignable 8 pedal functions.
(see the
CONNECTING PEDAL SECTION
on page 6.)
