The K-Pump™ model
100
designed to adapt easily for a variety of valves such as
Halkey-Roberts & Boston valves. K-Pump™ is a durable, high volume pump that is
easy to use and stows on the boat. K-Pump™ is a one-person manual pump with an
ergonomic handle for comfort over extended periods of use.
All K-Pump™ pumps are equipped with stow bag – a good place to keep your pump,
adaptors, lube, etc. All K-Pump™ pumps come lubricated and are ready to use.
A spare packet of K-Pump™ O-Ring lube is included with your pump.
For more information about your K-Pump™ visit www.k-pump.com.
BEFORE EACH USE OF YOUR K-PUMP™
100
:
Clean and dry off debris and water on the pump. Give 3-5 short strokes in the valve to
blow off any excess water located just inside the tip of the pump before inserting into
inflation valve. Now you are ready to use your K-Pump™
100
.
Inflation Valve Preparation:
The inflation valves are located on the
top of the pontoons in front of the
main pockets.
Each valve has a center button that opens
and closes the valve by simply pushing
down, and turning a quarter turn. The valve
is open when the center button is down
and closed when it is up. Before inflating,
mAKE suRE THE vAlvE is iN THE ClOsEd POsiTiON.
1. unscrew the valve cap and make sure valve is in the
closed position.
2. insert your K-Pump™
100
into valve as shown.
3. inflate pontoon using your K-Pump™
100
.
Note: The K-Pump™
100
works best in the
vertical position as shown.
4. inflate pontoon to 2.5 psi (.17 bar) or less,
do not over inflate.
Press and
turn on
center
button
Inflation Valve
P R O D U C T I N T R O D U C T I O N A N D U S E
K - P U M P ™
1 0 0
O P E R A T I N G A N D C A R E I N S T R U C T I O N S
