10
1
. Confirm that all the parts are present.
(See the parts list on page
9
).
2
. Identify the right and left pontoons.
You can identify the right and left pontoons by the “R” (right) and “L” (left) labels
sewn on the inside of the main pontoon pocket on top of each.
4
. Attach the seat frame to the pontoon side frames.
Locate the seat base frame and pontoon side frames.
The front of the pontoon side frames are the ends
labeled “L” (left) and “R” (right).
First, remove the four tube end caps in the side posts
of the pontoon side frames. Make sure the seat
frame strap is facing to the rear. Then insert the seat
platform frame rails into the pontoon side frame posts.
Insert four clevis frame pins from the top down into
the holes where the four seat platform rails slide onto
the pontoon side frame posts. Each wire security
retainer must go over the seat frame rail and then over
the clevis pin as shown.
You MUST lock the security retainers on all four
clevis pins to insure that the frame stays together.
FR
ONT
CLA
SSIC
AC
CES
SO
RIE
S
MA
DE I
N C
HIN
A
PAR
T #
(PR
OD
UC
TIO
N C
OD
E)
R
Left
pontoon
side
frame
Right
pontoon
side
frame
Seat
Frame
Seat frame strap to rear
Rear
Front
3
. Inflate the pontoon bladders.
The valve is located on the top of the
pontoons in front of the main pocket
[A].
The valve has a center button that
opens and closes by simply pushing
down [B].
THE VALVE IS OPEN WHEN THE CENTER
BUTTON IS DOWN, AND CLOSED
WHEN IT IS UP. BEFORE INFLATING,
MAKE SURE THE VALVE IS IN THE UP
(CLOSED) POSITION.
Unscrew the valve cap, make sure the
valve is closed. If the valve is open,
unlock it by pushing down on the
button and turning a quarter turn. Insert the inflation adapter into the valve and twist to secure [C].
Inflate using a foot pump or hand pump with a cone-type nozzle fitting [D].
Inflate the pontoon to about
3
/
4
full.
Do not inflate beyond
3
/
4
full because it
will make the next step very difficult—attaching the pontoons to the frame.
Repeat this step with the other pontoon. You will fully inflate the pontoons in step
8
.
B O Z E M A N P O N T O O N B O A T O W N E R ’ S M A N U A L
A S S E M B LY A N D U S E
Press and
turn on
center
button
Inflation
adapter
Insert
into
valve and
twist to
inflate
Inflation Valve
A
D
B
C
