9
FRONT PANEL CONTROLS
INPUT SELECTOR:
This selects one of the five inputs connected to the preamplifier, except TAPE IN (see TAPE
SWITCH below). The selector switch is silent and will prevent pulses when switching positions.
However, it remains good practice to reduce the volume control level or put MUTE to ON (steady
GREEN LED) when changing the input selection.
TAPE SWITCH:
In the SOURCE position, the preamp will process the signal as chosen by the INPUT
SELECTOR. In the TAPE position, the preamp will process the TAPE INPUT signal, overriding the
INPUT SELECTOR.
BALANCE CONTROL:
The custom balance control permits equal output of each channel in the center (detented)
position without additional loading to the signal. When shifted to the left or right, it merely
attenuates the opposite channel.
VOLUME CONTROL: (remote control)
The VOLUME CONTROL varies the output level of both channels simultaneously. It can be
operated from remote using the hand held control unit or manually turning the control knob at the
preamp.
PLAY/MUTE SWITCH: (remote control)
Switching between PLAY and MUTE can be done by either manually pressing the
PLAY/MUTE switch down momentarily on the 30 faceplate or pushing the MUTE button on the
hand held remote control unit. The PLAY (or MUTE OFF) and MUTE ON selections are indicated
by the STEADY RED or GREEN LED respectively at the preamp.
