OH 1300
500kg HYDRAULIC LIFT TABLE
USE
Brake using
WARNING
Brake lift table when not moving it in order to prevent sudden movement.
The brake is equipped with the swivel caster on the right side.
1- Braking the wheel, press the brake pedal.
2- Releasing the brake, lift up the brake pedal
Lifting the table
DO NOT overload lift table, stay within its rated capacity.
DO NOT side end load must be distributed on at least 80% of table area.
Press the lifting pedal several times the until the table reaches the desired position.
The table does not elevate after reaching the highest position even if the lifting pedal is pressed.
The table lowers slightly after reaching the highest position.
NOTE:
The hydraulic cylinder is designed to hold table. As is the nature of the hydraulic system, table
lowers very slowly over and extended period of time. Please note the table does not stay at the
same position definitely.
Lowering table
WARNING !
DO NOT put foot or hand in scissors mechanism.
Pull the lowering down and table lowers
Service
Lubricate each point described below every month :
1- Grease roller friction surface
2- Oil pin
3- Grease joint
4- Oil pedal fitting
Change hydraulic oil each year
1
2
1
2
3
4
Summary of Contents for OH 1300
Page 1: ...clas com TABLE ELEVATRICE DOUBLE CISEAUX 500kg 500kg HYDRAULIC LIFT TABLE OH 1300...
Page 10: ......
Page 11: ......
