
OE 8001
BATTERY CHARGER 1A
TECHNICAL SPECIFICATIONS
WORK ENVIRONMENT AND PLACEMENT
CONNECTIONS AND OPERATION INSTRUCTIONS
1. After the charger is connected with the battery, it will recognize the voltage of the battery and
automatically select the charging mode, 6V charging mode or 12V charging mode.
2. If the green indicator blinks slowly, the battery is being charged. If the green indicator is steady
on, the battery is fully charged.
3 If the charger is short-connected or inversely connected, the red light flashes quickly.
1. The charger shall be put in places that are well-ventilated, dry, sunshine-free, heat-free and
erosive gas-free. It shall be kept as distant as possible from storage battery when the direct
current cable allows and be placed stable to avoid falling.
2. Never place the charger directly on the battery or battery on the charger which is very dangerous.
3. During charging, if the temperature of battery exceeds 40°C, current shall be reduced. If
temperature exceeds 45°C, charging shall be stopped. Charging shall not be recommenced until
the battery temperature reduces to safe limits.
This appliance must only be connected to a 6V or 12V lead-acid battery.
Before charging,confirm that the voltage of the battery is either 6V or 12V by referring to the label
on the battery or from the information available rating to its application e.g. car user manual.
1. You can connect AC power first, connect positive and negative clip to battery, and then select
related mode. 6V or 12V pattern for automatic recognition.
2. Charge a 6V battery.Connect the AC Power,the charger selected to 6V mode.Then Connect
the positive (red) clamp from the battery charger to the positive(POS,P,+) post of the battery.
Connect the negative (black) clamps or from the battery charger to the negative(NEG,N,-) post
of the battery. The green light blinks slowly when charging.After fully-charged, the green light
will lighting continuously.
3. Charge a 12V battery,connect the AC Power,the charger selected to 12V mode.Then Connect
the positive (red) clamp from the battery charger to the positive(POS,P,+) post of the battery.
Connect the negative (black) clamps or from the battery charger to the negative(NEG,N,-) post
of the battery. The green light blinks slowly when charging.After fully-charged, the green light
will lighting continuously.
4. Connect AC power first, if there is a short circuit or clamp reversal, the red light flashes quickly.
Input voltage
Maximum input power
Output
Lead-acid battery
220-240V
20W
12V DC, 1A
6V DC, 1A
4-30Ah (for charging)
4-120Ah (for maintianing)
Summary of Contents for OE 8001
Page 1: ...clas com CHARGEUR DE BATTERIE 1A BATTERY CHARGER 1A OE 8001...
Page 9: ......
Page 10: ......
Page 11: ......