clas-equipements.com
clas-equipements.com
OE 6047
HOT AIR GUN 50-650°C
ADJUSTMENT
The air temperature can be adjusted to suit a wide range of applications. The table below suggests settings for
different applications
Adjustment
Application
1
Drying paint, varnish color shade samples, fi ller, adhesives,
construction joints and stucco forms
Drying wet timbor prior to fi lling
Removing stickers
Joining adhesives-Large-surface gluing with contact adhesives,
activation of pressure-sensitive adhesives, acceleration of bonding
processes, releasing of bonding points as well as releasing or
bonding of edge band or veneer.
Waxing and de-waxing
Shrinking PVC wrapping and insulation tubes
Defrosting of icy stairs and steps, door locks, trunk lids, car doors
or water pipes, as well as for defrosting refrigerators and ice
boxes
2
Welding of thermoplastic polymer, fl ooring materials of PVC and
linoleum, PVC-coated fabric, tarpaulins and foils
Bending plastic pipes and sheets
Soldering plumbing joints, tin, special silver solder, SMD
elements, cable lugs
Loosening rusted or tightly fastened nuts and bolts
Removing old and even thick coatings of oil paint, lacquer,
varnish and synthetic plaster
Disinfection-With hot air of 600°C, you can quickly rid animal
sties/stables of bacteria .Woodworm infestation can be
controlled (Caution: Danger of fi re! Do not heat up the wooden
surface excessively).
If you are not sure about the correct setting, start with a low temperature setting and gradually increase the
temperature until you achieve optimum results.
