CLAS OE 5010, Manual, Page: 14 / 20

OE 5010
MINI BOOSTER 12-24V 800A
How to use the LED illumination
1. Press the switch button, then press for 3 seconds to activate the LED torchlight.
2. Then press the switch button in sequence, there will be: flashing light, SOS light, light off.
3. After 25 seconds of inactivity the device will turn off automatically.
How to charge digital device with 5V USB output
1. Choose the suitable charging cable;
2. Put the charging cable into the device’s 5V USB output;
3. Connect the other end of charging cable to the digital device, and then press the switch button.
How to charge the digital device with output 12V/16V/19V
1. Confirm the voltage of the digital device;
2. Switch on and shift the voltage output to the same with the being charged digital device;
3. Choose the suitable adapter and connect this device with the being charged digital device;
4. The power indicator lights will flash which indicates the digital device is charging;
5. To ensure the voltage output will not change during charging, the “Shift” button will be locked automatically
when charging;
6. If there is a low voltage audible warning beep when switching on, the unit can still be used the charge the digital
device until the power lights go off.